Dovetail Drawers

Laser Logo

Laser Logo

*Your Drawer *Your Logo *Your Next Sale

Display your company’s logo on your custom made dovetail drawers with Top Drawer Component’s  CO2 Laser Engraving System. This laser can engrave on solid wood, plywood and melamine with a precise high resolution image. This is an inexpensive avenue for you to permanently advertise your company’s craftsmanship and name.

Standard File Slots (Front to Back)

Minimum width for Standard Letter File Slots is 13 3/4″ for 1/2″ thick sides and 14″ for 5/8″ thick sides

Minimum width for Standard Letter & Legal is 16 3/4″ for 1/2″ thick sides and 17″ for 5/8″ thick sides

Lateral File Slots (Side to Side)

Minimum depth for Lateral Letter File Slots is 13 3/4″ for 1/2″ thick sides and 14″ for 5/8″ thick sides

Minimum depth for Lateral Letter & Legal Slots is 16 3/4″ for 1/2″ thick sides and 17″ for 5/8″ thick sides

Bullnose

Bullnose

As a standard profile Top Drawer will use a 1/16 bullnose on our plywood products, which is sanded and then covered with a heat transfer foil.

Eased Edge

Eased Edge

This is the standard 1/16th round over that is used on our solid wood boxes.

Corner Drawers

Corner Drawers

Getting the most out of your cabinets is important when designing a kitchen, the corner area of most cabinets ends up as a “dead zone” or a lazy susan, but with Top Drawer you can make a unique addition to any kitchen with our corner drawer options.  These drawers are built with additional depth to help you get the most out of your cabinets.

Curved Front Drawers

Curved Front Drawers

With Top Drawer’s unique machinery and skill, we are able to produce drawers with a radius front to your spec.  Drawers are carefully laid up and dovetailed to provide a drawer that is ready for your radius drawer fronts to bring your custom work to the next level.  Our specialty department is able to create a curved front drawer unmatched in the industry at a price that your clients can afford.

Angled Drawers

Angled Drawers

Top Drawer’s unique abilty to manipulate dovetails gives you and your customers the chance to design something extraordinary to give you that special look you won’t find anywhere else.  Angled drawers can be from side to side, front to back, or top to bottom.

Tie Drawers

Tie Drawers

Our design for a specialty drawer specifically for ties will set off any custom closet.  The drawer is divided into min. 3 1/2 x 3 1/2 opening to keep a tie or even a belt in.   Drawers can be produced out of several materials and encompass various other options.  This particular drawer has a rounded front joint with a drop lip front, for easy access.

Trash Can Drawers

Trash Can Drawers

A custom built trash can drawer is the perfect way to improve the function of your cabinets.  Drawers can be made for single cans or double cans and can also be designed to use undermount hardware. * Trash can openings should be specified by customer and minimum depths and widths may be required.

Copyright Top Drawer Components Drawer Boxes & Cabinet Doors | Website By Netwirks